Skip to Content

Can you replace tile floor without removing cabinets?

Yes, it is possible to replace tile flooring without removing cabinets. This can be done by using a vibratory screed, which is a device that can be used to level sheets of material for more even flooring.

This tool works by shaking the tiles into place and is ideal for hard to reach areas such as floors underneath cabinets. Additionally, you can use a grinder or reciprocating saw to cut the tile to fit around the cabinets.

Once the tiles are laid and the grout has dried, your new tile floor should be finished and ready to use. Overall, replacing tile flooring without removing cabinets is certainly doable but may be more difficult than if the cabinets were removed first.

Do I have to remove kitchen cabinets to install new flooring?

No, you don’t have to remove the kitchen cabinets to install new flooring. You could install the flooring around the cabinets if you wish. However, if you’d like a seamless look, it is best to remove the cabinets before installation.

This will enable the floor installation to be done in one continuous section, from wall to wall. Removing the cabinets also allows for you to access the subflooring, which may need to be replaced or prepared in some way before layering the new flooring down.

Additionally, removing the cabinets allows for easier installation of floor trim, such as baseboard or quarter round molding, for a finished look.

Should you remove cabinets before flooring?

It is a personal choice whether you want to remove the cabinets before installing new flooring. In most cases, you can install new flooring around cabinetry and not have to remove it. However, if you have base cabinets that have been installed over subflooring and the vertical surfaces are uneven, it might be necessary to level the floor before continuing.

By removing the cabinets, this can give you unfettered access to the areas you need to work on, enabling you to ensure that everything is level before installing the new flooring. Additionally, once the new flooring is in, it can be challenging and time-consuming to sand or level the floor when it is around and beneath the cabinetry.

So you’ll need to weigh the additional labor costs of doing more finishing and sanding work, which could be substantial, versus just removing all the cabinetry. All things taken into consideration, it is ultimately your decision whether you choose to remove cabinets before flooring.

Is it better to install tile flooring under kitchen cabinets or not?

In general, it is better to install tile flooring under kitchen cabinets. Firstly, it helps protect the floor from moisture and spills that might occur from cooking or washing dishes. It also makes it easier to keep the floor clean, as tile is easy to mop and wipe down compared to carpet or wood.

Additionally, tile is more durable and less likely to wear out with regular foot traffic than other flooring options. Furthermore, installing tile under the cabinets can help create a neater, smoother transition from the lower cabinets to the flooring, which some may find more aesthetically pleasing.

On the other hand, some may prefer to not install tile under their cabinets as tile can be quite expensive, and thus would drive up the cost of the renovation. There may also be some potential downsides to installing tile such as having to seal it regularly and making sure it is properly grouted, which could be time consuming.

Additionally, if you have lower cabinets, you will have to virtually rebuild the cabinets to accommodate the flooring, adding additional labor.

Ultimately, whether you choose to install tile flooring under your kitchen cabinets or not is up to you and dependent on your own unique preferences and financial situation.

Can you install flooring after cabinets?

Yes, you can install flooring after cabinets. It is sometimes preferred to install the flooring after the cabinets to ensure the cabinets are not damaged. Some people install the flooring first and then the cabinets.

This process is slightly more difficult, however, because the cabinets must fit precisely with the existing floor. When installing the flooring after the cabinets, there are some important steps to take to ensure the job is done properly.

First, all the cabinets must be securely in place, and secured to the floor. This provides a secure and level base for the flooring. If the cabinets are not properly secured, the flooring may be compromised.

Second, the floor must be properly prepared. Any holes, cracks, or other imperfections should be filled with a flexible compound so the flooring has a solid foundation.

Third, the flooring needs to be laid out and cut to size. The pieces should fit snugly around the cabinets to ensure everything is secure. Once the flooring is laid, it must be carefully sealed at all sides and seams.

Finally, the cabinets should be placed that they are properly level and are not warped or bowed. If any of the cabinet pieces do not sit flush with the existing floor, shims may need to be inserted to ensure everything is properly secure.

By taking these steps, you can safely install the flooring after the cabinets. This method is preferred for those concerned about accidentally damaging the cabinets during the floor installation process.

In what order do you remodel a kitchen?

When remodeling a kitchen there are different steps that must be taken in order to ensure a successful and satisfactory result. Here is the suggested order for remodeling a kitchen:

1. Plan: Create a plan for the kitchen remodel, by researching trends, gathering ideas, identifying your needs and budget, and creating a timeline.

2. Disconnect: Disconnect power and water sources to the kitchen, as well as any current appliances or fixtures.

3. Demo: Start the demolition process, by removing any unwanted fixtures, appliances, and cabinets.

4. Prepare: Prep the area for the new installment by patching any holes in the wall, and installing backing and support walls, where needed.

5. Lay the Groundwork: Install the flooring and any tile, laminate, or hardwood desired in your design plan.

6. Install: Install any new cabinets, countertops, appliances, and light fixtures.

7. Finish: Apply any detailing, such as crown molding, backsplash, and other decorative finishes.

8. Connect: Reconnect power and water sources, as well as hooking up any appliances or fixtures.

9. Finish: Apply any paint, sealer, or enamell products desired to give the remodel its final touches.

10. Enjoy: Show off your newly remodeled kitchen, and enjoy its beauty and functionality.

How do I know if I have tile under my cabinets?

If you are considering replacing the cabinets in your kitchen, you may be wondering if there is tile beneath them. There are several ways to check if there is tile under your cabinets.

The first thing to do is to look around the edges of the cabinets and along the trim, to see if there is any visible tile. If you see a line of grout between the base of the cabinets and the wall, then this is likely a sign of tile.

Another clue is a change in the height of the cabinets near the floor, since tile or other flooring materials are typically thicker than linoleum or vinyl.

You can also carefully remove the kick plates and toe-kicks on the bottom of the cabinets—as long as you take care to do it gently and without damaging the cabinets—to see if any underlying tile is exposed.

Finally, if all else fails, you can carefully remove a portion of the cabinets to get a better view of the area behind them. This is not recommended, however, as doing so can damage your cabinets and create an additional expense.

Do kitchen cabinets sit on subfloor or finished floor?

The answer to this question is that it depends on the type of kitchen cabinets that are in question and the specific installation process that is being used. Generally, kitchen cabinets should be installed on top of a finished floor, and there should be a gap of 5 to 20 millimetres between the cabinet and the floor.

This is to allow for expansion and contraction of the wood, as well as any minor settling of the floors. However, if the kitchen cabinets are being installed using a base framing system, then they may be mounted directly to the subfloor with an appropriate underlayment.

Ultimately, it is important to consult with a professional to ensure that the cabinets are properly and efficiently installed.

What does poor tiling look like?

Poor tiling often manifests itself in a variety of unpleasant visual signs. For example, when tiles aren’t lined up properly, they can create an unsightly lippage where one tile surface is higher than the other.

Poor tiling is also noticeable when tiles are not cut properly and there is a gap left between adjacent pieces. Additionally, inadequate grouting can contribute to poor tiling and give the result an unfinished appearance.

Poor tiling can also be the result of using the wrong type of tile adhesive or not allowing enough drying time. Finally, one of the most visible signs of poor tiling is when there is unevenness or inconsistencies in the overall finish.

What comes first tiles or kitchen cabinets?

The answer to this question largely depends on the individual situation and the order of installation that works best for that job. Generally speaking, it is best to install the kitchen cabinets prior to putting in the tiles, as this allows a more efficient tiling job and opens up the area to make it easier to reach when tiling.

Not only this, but it also gives the cabinets a smoother and more effective finish once the tiling is complete. Additionally, it may be a good idea to add some additional support beneath the cabinets to ensure a safe and secure fit.

If you are planning on doing a backsplash, then it would be best to install the tiles before the kitchen cabinets, as this will give you more options and a greater degree of flexibility in terms of how you want to work the area.

All in all, the order of installation when it comes to tiles and kitchen cabinets will vary based on the individual situation.

What is the board under a tile floor called?

The board under a tile floor is typically referred to as a backing board, or substrate. It serves as a support structure and helps to keep the tiles in place, while also providing some level of soundproofing and insulation.

The backing board is usually made of either cement board or hardboard, and is affixed to the floor before the tiles are installed. Depending on the situation, the backing board may need to be attached to the underlying floor using screws or an adhesive.

Once the backing board is in place and secured, thinset mortar is typically laid down and the tiles are adhered to it, giving the finished floor the desired look.

Do cabinets or flooring get installed first?

The order of installation for cabinets and flooring depends on the type of flooring you are using and the type of cabinets you are installing. Generally, flooring should be installed before cabinets when using laminate, hardwood, vinyl plank, or tile flooring.

This allows the cabinets to be placed on top of the floor, which will give a more finished appearance. For carpet, it can be installed either before or after the cabinets. Installing the cabinets first will prevent damage to the carpet and save on installation time and labor.

For a more permanent installation, cabinets should be installed first and the carpet can be placed around them. Regardless of the order of installation, proper preparation and installation of both the cabinets and the flooring is essential for successful results.

Do you install cabinets or vinyl flooring first?

When installing cabinets and vinyl flooring, it is generally recommended to install the cabinets or millwork first, followed by the vinyl flooring. This will help ensure a seamless transition between the two materials, reducing the likelihood of any gaps that can be hidden underneath the flooring.

It also helps to keep any adhesive from the flooring from sticking to the cabinets, making it easier and faster to install. Additionally, professional installers often use techniques such as toe-nailing and scribing to get the cabinets perfectly flush against the vinyl flooring, making sure that the installation won’t cause any issues down the line.

How do you cover outdated floor tiles?

The best way to cover outdated floor tiles is to use a floor covering material such as linoleum, vinyl, or carpet. These materials come in a variety of styles and colors, so you can find something to match the rest of your decor.

When installing linoleum, you’ll want to sweep the surface of the tiles, then lay down a thin layer of mastic on the subfloor. Roll out the linoleum, then cut it to size with a razor blade and trim the edges with a hammer and chisel.

Vinyl tiles can be installed in much the same way as linoleum, though they provide more of a cushioning effect so it’s important to make sure the subfloor is level before installing.

If you’re looking for something a little more upscale, carpet is an option for covering your outdated tiles. It’s important to select a carpet pad to better protect the floor and prevent your carpet from slipping.

Lay the pad down and cut it to size, then apply the carpet itself with adhesive. Be sure to measure twice before cutting the carpet and keep in mind that any leftover carpet can be used as a doormat or wall-to-wall carpeting.

No matter which floor covering you choose, it’s best to consult with a professional for the best installation results. They can identify any underlying problems you may be unaware of and even recommend alternative flooring options that better suit your style and decor.

How can I cover my floor tiles cheaply?

Covering your floor tiles cheaply can involve several different approaches. Painting is one of the most cost-effective options. Primer and tile paint can be purchased from most hardware stores and the process will begin with cleaning and sanding the tiles.

For a more permanent solution, peel and stick tiles are a great option. These tiles are made from vinyl, are available in a variety of colors and patterns, and are incredibly easy to install. There are also various types of vinyl sheet or tile flooring that can be cut to fit your space and provide a higher level of coverage and insulation.

Finally, if you’re looking for an even cheaper option, you can get carpet remnant pieces to place directly over the top of your tiles. This solution is cheaper than many other options, but will likely not last as long.