Skip to Content

Do you put hinges on cabinet door first?

When installing cabinet doors, it is recommended that you install the hinges on the door first before attaching it to the cabinet frame. This allows for more accurate installation, since it gives you the opportunity to adjust the door for the perfect fit.

You can use a carpenter’s square to make sure the door is squared, and adjust the hinges for a good seal when the door is closed. Once the hinges are attached to the door, you can then secure the door to the cabinet frame with screws.

Make sure to check the instructions included with your hinges, as different models may have different instructions on attaching the hinges to the door. Additionally, make sure to pre-drill any holes before inserting screws, as this helps to keep the door from splitting and weakening over time.

After installing the hinges, the next step is to install the handles and knobs.

Is it better to put hinges on the door or frame first?

The answer to whether it is better to put hinges on the door or frame first will depend on personal preference and the type of door you are installing. Generally, it is easier to install hinges to the door first as the door is usually more portable and easier to handle than the frame.

When the door is in place, you can then install the hinges to the frame. If you are installing a heavier door or frame, it may be easier to mount the hinges to the frame first and then hang the door on them.

To ensure a proper installation, regardless of which side the hinges are installed to first, it’s important to consider the location of the screws, weight of the door, and the size of the hinge plates.

Make sure the hinges are properly aligned and that the holes line up when both door and frame are assembled.

How do you hang cabinet doors with hinges?

Hanging cabinet doors with hinges is a relatively simple process that can be done with just a few basic tools. Before you begin, make sure your hinges are the correct size and style for the cabinet doors.

If they are not, they will not fit properly.

First, you need to determine which side of the cabinet the hinges should be placed on. If the door is going to be hinged left, the hinges will be on the right side, and vice versa. The hinges should be placed in an area that will be hidden by the door frame when the door is closed.

Once you have determined where the hinges should be placed, you need to drill pilot holes in the cabinet where the hinges will be. Using a drill, make 3 or 4 holes in the designated area. Make sure the holes are level and all the same size.

After the pilot holes are drilled, attach the hinges to the cabinet with screws. Make sure the screws are snug, but not too tight that it over-tightens the hinge. If you over-tighten the screws, it could cause the cabinet door to sit unevenly.

After the hinges are secure on the cabinet, attach the cabinet door to the hinges. Make sure to place the cabinet door so the gap between the door and the cabinet frame is even. Use the screws provided to secure the door to the hinge.

Once the door is secure, check to make sure the door is hinged correctly and the frame is evenly spaced. If the door is not hinged correctly, adjust the hinges until it is even.

Once the door is hinged correctly, you are finished! With just a few simple steps, you can easily hang cabinet doors with hinges.

Can you put door hinges behind the door on kitchen cabinets?

Yes, it is possible to put door hinges behind the door on kitchen cabinets. This is sometimes referred to as a “hidden” or “concealed” hinge and is an aesthetically pleasing way of connecting the door to the cabinet.

Furthermore, the installation of concealed hinges is much easier than the traditional “surface-mounted” hinges and requires a much less complex setup. Installing concealed hinges is done by mounting the hinge onto the interior side of the door, with the screw holes in the cabinet frame.

The hinge should then be properly aligned and secured on both the door and the cabinet frame. This type of hinge does make the opening of doors easier, as the movement of the door is not impeded by an external hinge.

Additionally, it keeps a sleek look as the hinges are not visible from the exterior of the cabinet.

How do hinges go on cabinets?

Hinges go on cabinets by first determining which type of hinge you will use. Some popular types of hinges for cabinets include concealed hinges, functional hinges, decorative hinges, and self-closing hinges.

Once the type of hinge has been chosen, the hinge should be placed on the door and the cabinet frame.

For concealed hinges, a hole should be drilled into the interior of the door and the frame and the hinge should be placed in each hole. To ensure the hinge is correctly placed and lines up with the corresponding hardware, the door should be opened slowly to check the alignment.

For functional hinges, the hinge should be drilled to the door, while the opposite side needs to be nailed and/or screwed to the cabinet frame.

For decorative hinges, the hinge should be nailed, screwed, or bolted to the door and cabinet frame.

For self-closing hinges, a bracket should be attached to the cabinet frame and the hinge should be attached to the door and the bracket.

Once the hinge is securely in place, the door can be carefully opened and closed to check that alignment, functionality, and the openness is correct. If any adjustments need to be made, the hinge can be unscrewed and repositioned per the desired alignment.

Does a hinge go on inside or outside?

Whether a hinge goes on the inside or the outside of a door or window frame depends on the type of hinge being used and the desired look. Cabinets typically have hinges on the inside, while outward swing doors or French doors typically have hinges on the outside.

Screen doors often have hinges on the outside as well. Installing hinges on the outside of a door can also make it easier to remove the door if needed for repair or replacement, since the hinges are more accessible.

Additionally, if a person wants to change the look of their interior, the hinges can be moved from the inside of the door to the outside. Ultimately, the decision of whether to place hinges on the inside or outside of a door or window frame will depend on the desired function and look.

Do you have to recess hinges on a door?

Yes, in most cases, you do need to recess hinges on a door. A recessed hinge is a type of hinge with an open space cut into the doorframe and the door itself so the hinge can be mounted flush, or nearly flush, with the frame and door.

This prevents the door from bumping out at the hinges, which can cause it to bind and stick, making it difficult to open and close. Additionally, a recessed hinge ensures the door sits flush against the frame, and the open space that’s cut into the door and frame allows the door to swing securely and smoothly.

In terms of installation, recessing hinges is a straightforward but time-consuming process. It’s important to accurately mark where the hinges will fit into both the door and frame, cut the necessary recesses, and then align the parts correctly.

You will need to drill pilot holes for the screws that secure the hinge, and it’s essential that the screws are tightened correctly for a secure, long-lasting fit – otherwise, your door won’t close or stay closed properly.

Due to the effort and precision required to recess hinges correctly, some people opt for non-recessed door hinges, which are simpler to install. However, if you want your door to open and close securely and reliably, and for it to sit flush against the frame, recessed hinges are the best option.

Why is there a gap between cabinet doors?

There is typically a gap between cabinet doors for a few different reasons. First, it allows for the wood to expand and contract with temperature changes, as wood is not a static material and can swell and shrink.

Additionally, a gap keeps the cabinet doors from creaking or rubbing together when the doors are opened or closed. The gap also allows air to flow in and out of the cabinet, helping to prevent any moisture or humidity build-up inside which can cause wood to warp or swell and affect the longevity of your cabinets.

Finally, the gap gives each cabinet door a finished and more polished look, hiding any unevenness or imperfections in the doors or frames.

Can door hinges be put on wrong?

Yes, door hinges can definitely be installed incorrectly. The main thing to keep in mind when installing door hinges is to make sure they’re installed on the right side of the door. One way to accomplish this is to note the direction of the door swing when installing the hinges.

If the door opens outwardly, make sure the hinge leaf is on the inside of the door. Conversely, if the door opens inwardly, the hinge leaf should be placed on the outside of the door.

However, even with proper installation of the hinges, it is possible to incorrectly place the door in the frame. All hinged doors should have a slight gap between the door and the side of the frame in order for it to open and close properly.

The gap should remain consistent throughout the entire length of the door, or else parts of door may drag and jam. If this happens, it may be necessary to readjust the position of the hinges on the door.

In terms of aesthetics, it is also important to make sure the hinges are in line with each other. This will ensure a more pleasing look including a uniform reveal between the door and the frame.

Does it matter if you push at the same height as the hinges?

It depends on the type of hinges. If you have a self-closing hinge, pushing the door at the same height as the hinges won’t typically cause any problems. However, if you have a regular hinge, this can cause the door to become misaligned and create an uneven opening.

As well, when the door opens and closes, the pressure created may damage the hinges, as it puts extra strain on them. Additionally, uneven gaps around the frame can be created, which will allow air or water infiltrations.

It is usually best practice to open the door with two hands and push slightly below the hinge for optimal performance.

Do hinge stops go at the top or bottom?

The placement of hinge stops largely depends on the installation. Usually, in residential applications, the hinge stops go at the top. This is to prevent the door from opening too widely, allowing it to swing without impacting the walls or other nearby structures.

In commercial applications, the hinge stops may go at the bottom and sometimes even both. This ensures the bottom of the door does not swing out and hit something or someone that passes by. Additionally, if there is a security requirement, the top and bottom hinge stops may work in combination with other locking and deadbolt systems to hinder intruders.

Ultimately, it is up to the installer to decide where the hinge stops should go.

Can you put hinges on upside down?

Yes, it is possible to put hinges on upside down. This is sometimes done to ensure that the door or the item which is being attached is going to open in the correct direction. However, it is important to pay special attention when putting the hinges in upside down, as some hinges can only be used in certain orientations depending on the type of door or item.

To ensure that the item attached will open correctly and swing correctly it is important to make sure that the hinges have been installed in the correct orientation. Additionally, if the item being attached is a door it is important to make sure that the screws are facing the correct direction to ensure that the hinges are holding the weight of the door correctly.

Where should hinge door stops be placed?

Hinge door stops should be placed at the top and bottom of a door frame. The top hinge door stop helps to keep the door from slamming shut while the bottom one prevents the door from being opened too far and damaging the wall or other objects near the door.

To install the hinge door stops, they should be located 1/8” away from the frame and then secured into the door. When installing it, keep in mind that the door stop should be placed opposite of the direction that the door opens.

This helps to ensure that the door can open and close properly without any issues. Additionally, it’s important to make sure the door stop is securely fastened in place to prevent the door from shifting out of position.

How far should hinges be from top and bottom?

When installing door hinges, the distance from the top and bottom of the door should typically be 3 to 4 inches. This will allow for the proper movement of the door, as well as allowing for the correct operation of the door latch.

When measuring from the top, the measurement should be taken from the inside corner of the jamb to the top of the hinge. Similarly, when measuring from the bottom, the measurement should be taken from the lower corner of the jamb to the bottom of the hinge.

Generally, the same hinge size should be used on both the top and bottom of the door, so be sure to measure and space the hinges evenly.

How many hinges should a cabinet door have?

Generally speaking, the number of hinges a cabinet door should have depends on the size of the door and the weight of the contents it is protecting or concealing. A lightweight door, such as one made of hollow core, may need just two hinges.

Whereas, a kitchen wall cabinet with a door that is larger, may require three hinges. Ultimately, it is best to consult the manufacturer’s installation instructions to ensure the recommended number of hinges is used.

To ensure ease of movement, the hinges should also be spaced evenly along the length of the door. Additionally, if the top of the door is heavier than the bottom, then two hinges should be placed at the top of the door and one at the bottom.

If the door is wider than 36 inches, it may need extra hinges for additional support.