Skip to Content

Should laminate flooring go under kitchen cabinets?

Yes, laminate flooring should go under kitchen cabinets in most cases. This is because the cabinets can help protect the laminate flooring from wear and tear and spills. Additionally, any moisture, dirt, or spills that happen under the cabinets will also be protected by the cabinets, as well as being easier to clean.

The cabinets also help to secure the flooring in place by providing additional support, meaning that it is less likely to buckle, warp, or become unstuck. If in doubt, it is always best to consult with a professional who can provide the best advice for your particular laminate flooring and kitchen cabinet setup.

Do kitchen cabinets sit on laminate flooring?

In most cases, kitchen cabinets can be installed directly on laminate flooring without the need for extra reinforcement. However, it’s important to take several things into consideration before doing so.

First, check the weight of the cabinets to ensure they are not too heavy to be installed directly on the laminate flooring. Most laminate flooring stands up to the weight of standard kitchen cabinetry, but if the cabinets are particularly heavy, extra support may be needed with the addition of a plywood subfloor beneath the laminate.

Additionally, if your laminate flooring is thicker than standard-grade flooring, such as if it has a thicker wear layer or if it has a padding underneath it to reduce sound, you’ll need to use shorter screws or other fasteners to secure the cabinets slightly above the level of the flooring.

This helps to ensure the cabinets stay securely in place and do not shift over time due to weight or movement. When in doubt, consult with a professional to ensure the cabinets are properly and safely installed on your laminate flooring.

Is it better to install tile flooring under kitchen cabinets or not?

It is generally best to install tile flooring under kitchen cabinets. This is because it will help protect your floor from any damage caused by moisture and spills that may occur near the cabinets. Additionally, it will make it easier to clean the area behind the cabinets and make it easier to access in case you ever need to repair anything.

Finally, having tile underneath your cabinets will create a more aesthetically pleasing look as well.

Should I install cabinets before vinyl plank flooring?

When installing cabinets and vinyl plank flooring, it is important to consider which should be installed first. Generally, it is best to lay down the vinyl plank flooring first before the cabinets are installed.

This is because the weight of the cabinets could cause warping or other damage to the newly installed floor. It is also important to be aware that vinyl plank flooring should be able to expand and contract with temperature changes which could be impacted if the cabinets are installed first.

Installing the cabinets first could also cause the plank to not rest evenly on the floor, which would lead to creaking and other irregularities. Finally, it is much easier to cut the vinyl planks to fit around the base of the cabinet than it is to cut a cabinet to fit the floor.

Do floating floors go under appliances?

Yes, floating floors can go under appliances, and many homeowners opt for this type of installation. Floating floors, which are also sometimes called laminate planks, are installed without the use of glue or nails.

This makes them ideal for installation under appliances, such as stoves, dishwashers and refrigerators.

When installing floating floors under appliances, it is important to follow the appropriate guidance and approach the job with care. If a floating floor is not installed correctly, it can lead to separation and minimal noise reduction.

To ensure that your floating floor is correctly and safely installed under appliances, it is best to hire a professional installer who specializes in this type of project.

When a professional installer applies the floating floor under an appliance, they will usually use a slight upward slope from the appliance to the surrounding wall to keep the floor flat and reduce the risk of water damage.

They will also typically use specialized washers and shims beneath the legs of the appliance in order to keep the floor level and even and to avoid having any sharp edges protruding from the appliance.

Additionally, when installing floating floors under appliances, it is important to take the weight of the device into account to avoid any unnecessary stress on the flooring.

Overall, floating floors can be installed under appliances as long as the process is done with care and attention. It is important to hire a professional installer with experience in this kind of project, as they will understand all of the technical requirements and measures that need to be taken to ensure it is installed correctly and safely.

What are the disadvantages of a floating floor?

Floating floors have several disadvantages. First, floating floors require precise subfloor preparation for installation, which can be both time consuming and expensive. If the subflooring is not properly prepared, then the flooring may not lay correctly and could experience warping or buckling.

It is also recommended that the subfloor be primed, dried, and free of any dust and debris prior to installation. Additionally, floating floors are not ideal for areas that are frequently exposed to moisture, such as bathrooms or basements.

Because the flooring is not attached to the subfloor, moisture can penetrate underneath, potentially causing mold and mildew. While there are some ways to reduce moisture buildup and help prevent potential water damage, such as using a sealant or waterproofing material, floating floors are still not as water resistant as traditional hardwood or tile flooring.

Finally, floating floors tend to be noisier than traditional flooring, due to the lack of solid adhesion. While this effect is generally minimal, it can be magnified in areas with higher traffic and activity.

Where do you start laying laminate flooring in a kitchen?

When laying laminate flooring in a kitchen, it is important to start in the corner of the room. If possible, start with the corner that is closest to an exterior wall, as this is the most stable corner and will offer the most support for the floor.

Before laying the first piece of laminate, it is important to clear the floor of any furniture and appliances, to ensure the evenness of the floor. Be sure to check the subfloor for any protrusions or uneven spots.

It may also be necessary to level out any inconsistencies with an appropriate filler. Once the subfloor is properly prepared, the laminate flooring can start to be laid. Begin in the corner, by laying the first plank of laminate, with the tongue side facing the wall.

The tongue side of each plank should be secured in place with appropriate fasteners, such as metal clamps or glue. Continue laying planks, making sure to keep the gap between the planks consistent and use the same fastener to secure each piece.

When the last plank is in place, install the appropriate molding or transition pieces to ensure a finished look.

Where should I start my first row of laminate flooring?

When starting your first row of laminate flooring, it is important to ensure that you begin in the most visible corner of the room. This means that the corner you choose should be obvious when entering the room for the first time, such as the corner closest to the door.

It is important to start in that corner because it will ensure that all of the subsequent rows of flooring will line up with the starting row.

Before starting the installation, you should measure the wall and mark the spot where the first board will start. This will provide a reference point for the rest of the installation. Remember to leave a gap around the room’s perimeter of 5-10 mm.

If you’re going to be installing the laminate flooring over a concrete surface, be sure to check the concrete moisture level before proceeding with the installation.

Once you have the first row aligned, use a tapping block to gently tap the boards into place. The tapping block will help prevent any damage on the edge or surface of the flooring and ensure a tight fit.

If you are gluing the laminate flooring, you can use a wooden or rubber mallet to tap it firmly in place. Finally, spaces between boards should be filled with filler material, such as a sawdust and glue mixture.

After that, your floor should be ready for installation of the rest of the laminate flooring.

How do you decide which way to lay laminate flooring?

Deciding which way to lay laminate flooring is largely based on personal preference, but there are some key factors you should consider that can help influence your decision. The most important factor to consider is the natural light in the room.

If the majority of light is coming in from the left or right side of the room, it’s best to run the laminate flooring perpendicular to the source of light. This will give the room a wider appearance and help accurately represent the true color and pattern of the laminate.

In a room with multiple entryways, running the laminate flooring in the same direction in each room can help create a cohesive look. It can also be easier for you to preserve an even look or pattern by running the laminate planks in the same direction throughout.

F reshaping a room is also a requirement. Whether you’re trying to emphasize a certain area of the room, going around an isle pedestal or just make the room look larger, you can use the direction of the laminate flooring to instantly change the look and feel of the room.

Try running it diagonally to help minimize the distraction of long walls.

Lastly, when it comes to resale value, many buyers prefer the classic look of running laminate flooring in parallel lines, but as long as you’re consistent, the direction won’t change the value of the home.

Ultimately, there is no right or wrong answer when it comes to which direction you should lay your laminate flooring, so be sure to consider all of the factors mentioned above before making your decision.

How far from the wall should you start laminate flooring?

When installing laminate flooring, you should leave a gap of at least 1/4 inch, or 6mm, between the flooring and the wall. This gap should be in place throughout the installation and left all the way around the perimeter of the room.

The edge of the laminate flooring should not be flush with the wall or closet. Due to potential expansion and contraction of the laminate, the gap will help to prevent buckling and other issues. If you are installing laminate with a foam underlayment, you may need a slightly larger gap.

In order to accurately measure the gap to the wall, you should use a spacers.

It is recommended to begin installation from the most visible corner of the room, as this will form the neatest edge along the wall perimeter. As you work towards the less visible wall, you can use a saw, jigsaw or circular saw to cut the flooring and ensure a neat finish.

In short, when laying laminate flooring, it is important to leave a gap of 1/4 inch (6mm) between the wall and the edge of the laminate; and you should begin installation from the most visible corner and use a saw to cut the flooring to fit along the wall.

What should you not do when installing laminate flooring?

When installing laminate flooring, there are several things you should not do. First, you should not just lay down the flooring without taking the necessary precautions to prepare the surface. This includes ensuring that the subfloor is clean, flat, and dry, and that all protruding nails are removed.

Second, you should not use nail guns or staples to attach the laminate flooring, as this can cause major damage to the flooring when finished. Third, you should avoid using excess glue or adhesive to secure the planks, as this can damage the integrity of the flooring and lead to issues like bubbling.

Fourth, you should avoid using a wet mop to clean the laminate flooring. This can create excess moisture that can damage the flooring over time. Lastly, you should not drag heavy furniture across the laminate flooring; instead, you should use furniture sliders to avoid scratching or denting the planks.

Do you cut the tongue off the first row of laminate?

No, cutting the tongue off the first row of laminate is not necessary. You can simply butt the long edge of each piece of laminate together. For maximum adhesion it is recommended to apply an adhesive to the floor or subfloor before laying the first row.

It is also important to use a pull bar when installing laminate flooring to ensure a tight fit between planks. It is best to take your time to make sure the laminate pieces fit together properly. Additionally, make sure to leave a 1/4″ expansion gap between the walls and the laminate to allow the floor to expand during temperature and humidity changes.

Which way do you lay laminate flooring to make room look bigger?

Laying laminate flooring can be a great way to make a room look bigger. The most important thing to remember is to lay the flooring in the same direction as the longest wall in the room. This creates an illusion of space.

The boards should also be laid parallel to the windows and should extend from the middle of one wall to the middle of the other, rather than stopping at the wall or the window. Additionally, using planks of the same width across the entire floor area can help to create balance and a more cohesive look.

The use of light colored boards or those with a lighter finish is also recommended as these create a sense of space as the light is reflected throughout the room. Finally, making sure the border lines of the laminate pieces line up in a consistent way creates a smooth transition and makes the room appear larger.

Is it OK not to stagger laminate flooring?

No, it is not okay to not to stagger laminate flooring. Doing so can cause the floor to buckle or crack over time due to the lack of structural integrity. Staggering the laminate planks helps to evenly distribute the weight of the flooring across the entire surface.

This will help to ensure that the flooring is securely held in place and will not become unstable. In addition, when the flooring is staggered, it prevents water or dirt build-up in one area, while also creating a pleasing aesthetic and disguising any imperfections the individual planks may have.