Skip to Content

What are the error codes for a Whirlpool oven?

Error codes vary depending on the specific model of Whirlpool oven you have. Generally, you should be able to find information about what the specific codes mean in your oven’s user manual or online.

Common Whirlpool oven error codes include E1 (which means the oven has detected a problem with its temperature sensor), F1 (which indicates an issue with the oven temp sensor or internal temperature sensing circuit), F2 (which means the oven has detected an issue with its keypad), F3 (which indicates that the oven has detected an open oven temperature sensing circuit) and F5 (which means the oven has detected an issue with its safety flip-flop circuit).

Some models also have codes such as E2, E3, E4, and F4, which have similar meanings.

If you can’t find the exact error code for your oven, try searching for the code number on the manufacturer’s website or through a search engine. It can also be helpful to consult a qualified technician or repairman to determine the exact cause of the problem.

What are the Whirlpool error codes?

Whirlpool error codes generally appear in an LCD panel on the front of the appliance. Depending on the type of appliance, the codes can indicate a variety of issues. Generally, the codes tell you what action to take to get the appliance working again.

Below are a few of the common Whirlpool error codes along with their definitions and suggested resolutions:

F1 – This code indicates an open oven temperature sensing circuit, meaning the oven temperature sensor is open. To fix this issue, check the wire connections between the oven control board and the temperature sensor, and if they are connected securely, then replace the temperature sensor.

F2 – This code indicates an oven temperature sensing circuit shorted, or a shorted oven temperature sensor. To address this issue, check the wire connections between the oven control board and the temperature sensor and if they are connected securely, then replace the temperature sensor.

F3 – This code indicates a shorted or open oven temperature sensing circuit. To fix this issue, check the wire connections between the oven control board and the temperature sensor, and if they are connected securely, then replace the temperature sensor.

F5 – This code indicates the oven door is open or unlatched. Make sure the door is fully closed and latched to ensure it is working properly.

F6 – This code indicates a problem with the door lock assembly or wiring. If the door is locked properly, replace the door lock assembly.

F7 – This code indicates the electronic oven control board has failed. If this code appears, replace the control board.

F8 – This code indicates a stuck button on the electronic oven control board. To address this issue, examine the button and if it is stuck, replace the control board.

F9 – This code indicates the oven lock motor has failed. To resolve this, replace the oven lock assembly.

These are just a few of the most common Whirlpool error codes. Depending your specific model of appliance, additional codes may exist. If you ever experience any of these codes, be sure to contact a qualified appliance repair technician to keep your appliance running properly.

Why is my oven beeping and saying F3E2?

F3E2 is an error code that usually indicates an issue with the oven’s temperature sensor. The temperature sensor monitors the oven’s temperature and allows it to be regulated. If the oven senses a temperature variation outside of its safety threshold, it will shut off and display the error code F3E2.

This could indicate a problem with the wiring between the sensor and the oven’s control board. Additionally, it may be caused by a faulty or disconnected sensor.

In some cases, the oven’s built-in diagnostic system may detect a minor variation in temperature and display the F3E2 code without an accompanying error message. If this is the case, the oven should still be working, though the temperature may range from slightly lower to higher than the setting you’ve selected.

To diagnose the problem, you may want to unplug the oven and inspect the wires between the temperature sensor and the control board for any burning or corrosion. If either of these are present, the sensor may need to be replaced.

If the wiring is secure and the sensor is fully connected, the problem may also lie with the control board itself. In this case, it may be best to consult a professional to avoid any further complications.

Is there a reset button on a Whirlpool oven?

Yes, there is usually a reset button on a Whirlpool oven. It is usually located on the control panel and looks like a “thumbprint” symbol. The reset button will help to reset the oven back to its original factory-set condition and help clear out any programming that may have been corrupted or any issues that may have occurred.

In addition, it is also possible to reset the control panel itself by holding down the clear/off button for approximately three seconds until the oven control panel lights flash and beeps. Press down and hold the same button again until the control panel will reset and the oven will sound off with another beep.

This should reset the oven and allow you to use the oven once again.

How do I fix F3 error on my oven?

If you are experiencing an F3 error code on your oven, there are a few possible causes and solutions.

First, make sure that your oven is plugged in properly and that the circuit breaker hasn’t tripped. If the outlet isn’t working correctly, check the wiring to the outlet or replace the outlet, if necessary.

Next, inspect the oven for any signs of food, grease, or other debris that could be interfering with air circulation. If present, clean the debris from the oven and rinse the oven with warm, soapy water to remove any residue.

Next, make sure that the oven temperature sensor is in good condition and properly inserted. The temperature sensor should be located near the back wall of the oven. To make sure the sensor is working correctly, try testing it with a multimeter.

If the temperature sensor isn’t correctly installed or isn’t working correctly, the F3 error code will continue to appear. If the temperature sensor isn’t the issue, the issue may be related to the electronic control board.

If this is the case, you may need to call a professional to repair or replace the electronic control board.

If none of the above solutions work, you may need to try resetting your oven. To do this, simply turn off the power to your oven, wait a few moments, and then turn it back on. If the reset process doesn’t solve the problem, then you may need to contact the manufacturer for further assistance.

How do you fix an oven error F2?

First, check to see if the oven temperature sensor is connected properly. If this connection is defective, it can cause an F2 error. Make sure the connection is secure and that there’s no contamination or wear on the sensor terminals.

If this isn’t the issue, you should look for other issues with wiring or voltage supply. A professional technician should check any wiring harness or terminal boards and check that the line voltages are within specification.

If wiring or voltage supply is the issue, they may need to replace the components.

If all of these potential problems have been ruled out, then you may need to replace the Electronic Oven Control (EOC). This is the main controller of the oven, and a defective one will cause an F2 error.

A professional technician can replace and test the EOC unit.

If you are still having problems fixing the oven error F2, it is advised to consult a professional technician. They can diagnose and fix any misfiring parts quickly and efficiently.

How much does it cost to fix an oven temperature sensor?

The cost of fixing an oven temperature sensor will depend on several factors, including the cost of the replacement part, the labor cost, and any fees for diagnosis or additional services. Generally, for a basic replacement part, customers can expect to pay around $50-100.

Labor costs will depend on the type of repair and the technician, with typical costs ranging from $50-100 per hour. Some additional fees, such as diagnostic fees or additional services, can increase the overall cost.

An exact quote will depend on the type of oven you own, the replacement part you need, and the technician you hire.

What are the symptoms of a faulty temperature sensor?

The symptoms of a faulty temperature sensor can vary depending on the specific engine and vehicle, however, some common symptoms can include engine overheating, a temp gauge not operating correctly or moving erratically, poor fuel economy, low oil pressure, stalling, excessive exhaust smoke, and poor performance.

Additionally, a fault temperature sensor can cause false readings on the instrument panel, which can lead to inadequate fuel adjustments and increased emissions. If the faulty temperature sensor is mounted to the radiator or cooling system, this can lead to the cooling system not flushing properly, which can cause the coolant to deteriorate and cause it to become contaminated, resulting in engine failure.

How do I know if my temperature sensor is broken?

The first thing you should do is to check the physical condition of the sensor. Look for any signs of physical damage, such as cracks or scratches, that could be causing the sensor to malfunction. You should also check for any corrosion or contamination on the sensor, which could be causing inaccurate readings.

Next, you should check the wiring of the sensor to make sure it is free from any corrosion or dirt, as this can also affect its readings. If the wiring appears to be in good condition, you can check the actual temperature readings from the sensor.

Use a multimeter in order to check the output from the sensor, and check to see if the readings are within expected parameters.

Finally, if the physical condition of the sensor and wiring check out, you should use a calibration or diagnostic tool to test the accuracy of the sensor. This will give you a better indication of whether the sensor is malfunctioning or not.

If a diagnostic tool indicates that the sensor is malfunctioning, you should replace it with a new one in order to ensure accurate temperature readings.

How do I fix my Whirlpool oven that is not heating?

If your Whirlpool oven is not heating, the cause could be fairly simple or complex. It is important to troubleshoot and identify the reason for the heating issue before attempting a repair. The following steps can help you determine the cause of the problem and correct the issue:

1. Check the power: Make sure the oven is plugged in and the circuit it is on is not overloaded. This is a common cause of a heating issue.

2. Check the temperature setting: If the oven has been accidentally set to a low temperature, it may not reach the desired heat levels even though the power is on. Double-check that the control settings are correct.

3. Inspect the elements: Ensure that the heating element is clean, free of food residue, and in good condition. If you notice any breaks in the element, it will need to be replaced.

4. Clean the igniter: If the element appears to be in good condition, the issue could be with the igniter. Vacuum any food or debris from the slots on the burner tray, and then use a damp cloth or vacuum with a brush attachment to remove any particles from the burner igniter.

5. Check the thermostat: The thermostat is responsible for regulating the temperature inside the oven and ensuring that the oven does not get too hot. If the thermostat is faulty, it will prevent the oven from reaching the desired heat level.

6. Contact a professional: If you cannot find the source of the problem, you should contact a professional appliance repair technician as soon as possible. They will be able to properly diagnose the issue and advise you on the best course of action.

How do I scan codes with Whirlpool app?

To scan codes with the Whirlpool app, you will need to download it and create an account. Once you have set up your account, follow the steps below:

1. Open the Whirlpool app and select ‘Scan’ from the menu at the top.

2. Hold your device about 6 inches away from the code you want to scan, and line it up with the center of the code.

3. Once the code is in the correct position, it will automatically be detected and you should see a notification that your code has been scanned successfully.

4. If you want to view the details of the code you scanned, simply select the ‘More Details’ option.

If you run into any issues while trying to scan codes with the Whirlpool app, contact their customer service team and they will be happy to assist you.

What is F3E2 Whirlpool?

F3E2 Whirlpool is a type of dishwasher error code. It is an indication that the water isn’t draining from the dishwasher as it should be. This can happen for a number of different reasons, including a blocked drain, faulty drain pump, or something blocking the pump itself.

If this code pops up, it’s important to address the issue as soon as possible to ensure the dishwasher is functioning properly and safely. The first step should be to check if the drain hose or filter is blocked or kinked, as this is the most common cause for the F3E2 error code.

Additionally, the drain pump should be checked for any blockages or other possible issues and the motor should also be inspected to make sure it’s running properly. When this error code appears it’s important to take steps to address the issue right away to ensure that your dishwasher continues to work properly.

What does it mean when my Whirlpool oven says E2 and f3?

E2 and F3 are fault codes generated by Whirlpool ovens when something is wrong. The E2 code indicates a problem with the temperature sensor or the oven control board, while the F3 code indicates a problem with the oven temperature sensor circuit or its wiring.

Both of these issues can be caused by a malfunctioning temperature sensor, faulty wiring, or a malfunctioning oven control board. It is recommended to consult a qualified technician to replace the faulty components if the problem persists after a thorough troubleshooting.

It is important to power off the appliance before performing any maintenance or repairs.

Does Whirlpool oven have a reset button?

Yes, the Whirlpool oven does have a reset button. It is usually located on the control panel, either near the on/off switch, or somewhere else on the display, depending on the model. To reset the oven, press and hold the reset button for 3-5 seconds until the display turns off and then turns back on.

If all else fails, you may need to unplug the oven from the wall outlet, wait 1-2 minutes, then plug it back in. This should reset the oven completely, restoring all of its original factory settings.

How do I manually reset my oven?

If you need to manually reset your oven, the exact steps you need to take will vary depending on the make and model of your oven. However, in most cases, there should be a manual reset button or switch located somewhere on the oven.

This is usually located behind the oven, or behind a vent near the oven’s controls.

Once you’ve found the reset button or switch, follow the manufacturer’s instructions for resetting the oven. This can include pressing the reset button, pressing a combination of buttons, or unplugging the oven from the power source and waiting a few minutes before plugging it back in.

Make sure to refer to the manufacturer’s instructions, as attempting a manual reset without the proper instructions could damage your oven.

If resetting your oven also requires resetting the computerized clock, you may need to enter a special code. To do this, consult the user’s manual that came with your oven, or search for the manual online.

Once you’ve finished the reset process, it’s a good idea to test your oven to make sure it’s working correctly. Start by setting the oven temperature to 350°F and turning on the bake setting. Set a timer for 10 minutes and then check to make sure the oven is cooking properly.

If everything looks good, your oven has been reset successfully.