In the military, “frago” is short for the term Fragmentary Order. This is an informal type of command that is transmitted without formal notice. It is issued by a commander to change a previously issued order or to modify existing plans.
Frago orders are often communicated orally, rather than in writing, and are commonly used in a rapidly changing situation where the commander needs to communicate quickly and efficiently with their troops.
Generally speaking, a frago is used when the commander wants to quickly direct the troops to execute a specific task. Examples of common frago orders include designating targets, designating routes, changing formations, and appointing temporary leaders.
What’s the meaning of Frago?
Frago is short for “Fragmentary Order,” which is a military term used to convey directives from higher to lower headquarters. This type of order is used when explicit instructions or complete orders are not possible due to time constraints, lack of resources, or other factors.
It usually contains only the core elements necessary for the issuing command to provide direction and guidance without having to provide comprehensive instructions. The issuing authority can also make assumptions about the subordinate’s abilities and responsibilities to fill in any missing information.
What does OP stand for in combat?
OP stands for “Observation Post” in combat terminology. It refers to a position from which observers can observe the enemy’s territory or activity in order to gather intelligence, direct fire, and provide early warning to the friendly forces.
Often, an OP is manned by a small number of soldiers or other operators, and it is usually positioned in a concealed location to avoid detection or attack from the enemy. In a tactical situation, having an OP is essential for conducting reconnaissance, monitoring the enemy’s movements, and enabling effective fire coordination.
How do you say OK in military?
In the military, OK is commonly referred to as “roger” or “roger that. ” This phrase is used to indicate that an order or directive has been received, understood, and acknowledged. “Roger” is derived from the nautical term “roger wilco”, which means “received and willing to comply.
” Other terms such as “10-4” (meaning “message received”) may also be used to indicate affirmative answers or acceptance of orders in the military.
What does Bravo Foxtrot mean in the Marines?
In the Marine Corps, the phrase “Bravo Foxtrot” is slang for “battalion formation” or “BF” for short. The term is typically used to refer to an assembly of marines in which all members are in formation, facing the same direction, standing at attention and standing in an even line from left to right.
It is typically used during parades, ceremonies, or important events such as an award ceremony or to mark the beginning of a new command. The phrase is also sometimes used in drills during training or as a way for junior marines to signal that they acknowledge an order given by a commanding officer.
What is military top slang?
Military top slang is the specialized jargon and terminology used to communicate between members of the military. This “slang” is a collection of acronyms, abbreviations, and obscure terminology that is commonly used among military personnel to quickly and easily relay information or instructions.
Military top slang is used to make communication easier and more efficient, but can be difficult for civilians to understand. Common terms include BOHICA (bend over, here it comes again) and FUBAR (fouled up beyond all recognition).
Other slang terms may refer to specific military operations or equipment, such as SNAFU (situation normal: all fouled up) and TIC (troops in contact). As the military changes, so does the slang, which keeps the language from becoming outdated.
Why do soldiers say fubar?
The expression “FUBAR” (which stands for “Fucked Up Beyond All Recognition”) originated during World War II and is commonly used by soldiers and military personnel to describe a chaotic or disastrous situation.
While the exact etymology of the phrase is unclear, it is believed to have originated from the German expression “Fur besser ungut”, meaning “for better or worse”.
The term is used to describe anything from botched missions to simple miscommunications, with the understanding that the situation is more complex than expected. This term is often used in reference to troop maneuvers, military exercises, missions, and equipment, as well as bureaucratic and administrative blunders.
Today, the term is often used by service members in the military to bring a lighthearted approach to a difficult or serious situation. In this way, “FUBAR” can also be seen as an act of deflection, as service members use humor to ease the burden of stressful situations while still conveying the gravity of the current state.
This expression has also been adopted by civilian populations, appearing in popular culture as a slang term for any chaotic or desperate situation.
What is a fragmentary order army?
A fragmentary order army is an army that is organized into smaller individual units known as “fragmentary” units. These units typically consist of 1-3 individuals that are connected to a larger army or unit.
Fragmentary orders are used to maintain operational efficiency, provide flexibility, and support tactical operations. Fragmentary orders can be used for a variety of tasks, including reconnaissance, raids, ambushes, and other mission types.
Fragmentary units are most commonly found in ground forces, such as infantry and special operations units, but they can also be utilized in air and maritime forces. Fragmentary orders are usually given verbally, with commanders issuing orders intended to be executed by all individual fragmentary units in the same area.
This type of order is designed to enable commanders to increasingly control the battlefield, as well as increase the ability to rapidly respond to changing situations.
What are the 4 types of military orders?
There are four main types of military orders: advisory, direct, voluntary and involuntary.
Advisory orders are typically given by commanders to remind their personnel of an already established policy or course of action. They are not technically orders, but rather a verbal suggestion that may have an effect on a troop’s course of action.
Direct orders are orders that are issued with a specific purpose. A commander may issue a direct order to have a task completed or to have troops in a certain location. This type of order must be followed exactly as it is issued.
Voluntary orders are given when there is no existing policy or procedure. They can be given in response to a specific circumstance or to initiate a new approach. They typically involve the servicemembers making a personal decision to follow the order.
Involuntary orders are orders that are issued when the circumstances allow for no other course of action. These orders are usually issued in situations that involve high levels of risk or when there has been a failure to comply with a directive.
They require servicemembers to comply without question or other circumstances being taken into account.
Can a soldier ignore an order?
Generally, soldiers should not ignore any orders from a superior. According to Article 90 of the Uniform Code of Military Justice (UCMJ), “Any person subject to this chapter who—(1) violates or fails to obey any lawful general order or regulation… shall be punished as a court-martial may direct.
” This means that in refusing to obey any order, a service member can be court-martialed.
However, if an order is considered illegal by its nature or given under the wrong scope of authority, a service member may be able to try to defend their refusal to obey in a court martial hearing. It is important to consider the circumstances of any order, and what the consequences of obedience may be if such order is illegal.
An individual should consider whether such order violates the law, domestic or international, as well as the service member’s oath to uphold the laws of the Constitution. An individual may also consider the morality of an order before deciding whether to obey it.
Ultimately, service members do have a certain a moral obligation to disobey an illegal order. According to the Nuremberg Defense, a person cannot be held legally responsible for obeying an illegal order, but there may be moral accountability.
Service members may also be held accountable for war crimes if they follow through with an illegal order. Depending on the situation, legal defense for refusal to obey may be available, so it is always best to research the legality and morality of an order before deciding to obey it or not.
What are the 3 major orders in the Army?
The three major orders in the Army are the Executive, Operational, and Support orders.
The Executive Order is the most important order as it sets the tone and goals for the Army. It is issued by the commanding officer and sets the vision and goals for the Army. The Executive Order will usually include missions and activities that must be accomplished to achieve the desired outcome.
The Operational Order is the order issued by the commanding officer that is used to direct and instruct personnel about the daily operations and activities of the Army. This order can include a variety of topics such as safety, security, training, supply, and deployment.
Finally, the Support Order is used to direct and instruct personnel about administrative matters such as personnel, accounting, equipment maintenance, and payroll. This is typically used to ensure that the Army has adequate personnel, resources, and equipment to complete its missions.
What is the 4 general order?
The Four General Orders are four directives that are issued to sentries in the military to ensure their proper conduct when standing sentry duty. These general orders provide a set of guidelines that must be remembered while on duty, and they must be followed at all times.
The Four General Orders are as follows:
First: To take charge of this post and all government property in view.
Second: To walk my post in a military manner, keeping always on the alert and observing everything that takes place within sight or hearing.
Third: To report all violations of orders I am instructed to enforce.
Fourth: To repeat all calls from posts more distant from the guardhouse than my own.
Essentially, these orders require the sentry to take their job seriously, pay attention to their surroundings, and obey the orders they were instructed to enforce. Additionally, they are responsible for reporting all violations of orders.
Finally, they are responsible for repeating calls from distant posts. By following these orders, a sentry can ensure that they have fulfilled their duty to the best of their abilities.
What are the 4 Army commands?
The four Army commands, which encompass the geographical boundaries of the United States and its territories, are U. S. Army Forces Command (FORSCOM), Army Materiel Command (AMC), U. S. Army Training and Doctrine Command (TRADOC), and U.
S. Army Pacific Command (USARPAC).
U. S. Army Forces Command (FORSCOM) is the Army’s largest major command, providing soldiers, equipment, and training necessary for defense of the United States and its interests. It consists of seven active component divisions, three Army National Guard divisions, and one Army Reserve command.
FORSCOM also directs 28 Army commands and garners support from 71 installation management commands.
The Army Materiel Command (AMC) ensures that soldier’s equipment is up-to-date, reliable, and working. It is the Army’s single manager responsible for all Army acquisition, research, development, and logistics operations.
AMC consists of two major subordinate commands, the Army Sustainment Command and the Army Contracting Command, which help to supply the troops with the materiel they need.
The U. S. Army Training and Doctrine Command (TRADOC) is responsible for providing trained and ready forces to the combatant commanders. TRADOC is the Army’s conduit for developing, testing and integrating new doctrines, strategies and training, as well as advancing and disseminating knowledge and ideas.
Finally, the U. S. Army Pacific Command (USARPAC) is responsible for leading Army forces in the Indo-Pacific region and for providing contingency and disaster response throughout the region. USARPAC commands, supports and coordinates the actions of 5 Component Commands, 6 separated Army commands, and 10 Army agencies as part of its mission.
What is Priority 4 military?
Priority 4 military is the lowest priority status that is authorized by the Department of Defense (DoD) for service members who are full-time active duty members, members of the Reserve or National Guard, or even retirees.
The Priority 4 status is the last category after Priority 1, 2, or 3 and it is granted to those who have an honorable or a general discharge release from active duty. The Priority 4 members are those who have completed their service and are no longer needed on active duty.
This category is reserved for members who are no longer needed for active service, either due to their age, medical condition, or other discharge factors, such as having reached their retirement date.
Priority 4 members are the last to get the priority treatment when it comes to DoD resources. They typically receive access to the same benefits as other DOD members, but they may have to wait longer or they may not get the same level of care.
While they do receive some benefits, they may not get access to all of the services or programs that are provided by the DoD.
It is important to note that Priority 4 members do not have the same level of protection or access to resources as Priority 1, 2, or 3 members. These members are not eligible for deployment, nor are they guaranteed the same protection under the Uniform Code of Military Justice or other protective regulations.
In addition, they are not eligible to be recalled to active duty in any situation.
What goes into a Frago?
A Frago is a mission-type order issued in the military. It serves as a quick and easily understood instruction to a subordinate commander, task force, or individual. The components of a Frago typically include the following:
1. Authorizing headquarters: This is the headquarters issuing the Frago.
2. Task organization: This section explains who is to be assigned to the mission, as well what their specific roles and responsibilities are.
3. Operational objective: This section outlines the purpose, aims, and objectives of the Frago.
4. Concept of operations: This section provides a detailed description of the plan for the mission and how it will be accomplished.
5. Command, control, and communications: This section outlines how command and control will be maintained throughout the mission. It also explains how communications between various elements of the mission will be handled.
6. Resources: This section breaks down the resources needed for the successful execution of the Frago, such as materiel and personnel.
7. Coordinating instructions: This section provides any special instructions that must be given to multiple units.
8. Time and place: This section outlines when the mission is to begin and any specified location that must be reached.
9. Other tasks: This section outlines any other task, tasking or assignment that is to be completed by one or more elements of the mission.
10. Signature: This section is signed by the authorizing headquarters, officially putting the Frago in effect.