A Kenmore Coldspot is a line of refrigerators manufactured by Sears and Kenmore. It is a top-freezer refrigerator model with many features, such as adjustable shelves, a crisper drawer, a deli tray, and adjustable door bins.
It is available in both standard and Contour (curved) model ranges. Depending on the model, the Kenmore Coldspot comes with a range of energy-saving features, such as an energy-saver toggle switch that reduces energy consumption, LED interior lighting that uses less power, and an EZ-Connect ice maker.
Additionally, some Coldspot models offer Enhanced AirTight crispers with humidity control, Spill Org System, adjustable gallon-sized door bins, and other features. In order to ensure that the Coldspot is as efficient as possible, it is important to keep the refrigerator clean and airtight and to replace the air filter periodically.
How many cubic feet is Kenmore Coldspot 106?
The Kenmore Coldspot 106 has a capacity of 18. 2 cubic feet. It is an upright, midsized refrigerator with 25. 5 inch depth (including handles), 33. 5 inch width and 66. 25 inch height. It has adjustable wire shelves, multiple interior bins, 2 humidity-controlled crispers, 1 full-width pantry drawer, adjustable gallon- size door bins, and automatic interior light that illuminates the interior when the doors are opened.
It also has a deli meat drawer for easy access to cold-cut goods. In total, the Kenmore Coldspot 106 has 18. 2 cubic feet of usable space, making it ideal for smaller to midsized households that need reliable cooling capability.
Who makes Kenmore Coldspot refrigerators?
Kenmore Coldspot refrigerators are manufactured and distributed by the Sears Home Appliance Showroom. The company is known for its high quality, reliable products and low prices. Kenmore Coldspot refrigerators come in a variety of styles, sizes, and colors.
They offer both bottom- and top-freezer models, as well as French-door and side-by-side models. Features such as adjustable cantilever shelving, in-door ice dispensers, and temperature-controlled compartments ensure that you can find the perfect refrigerator for your kitchen.
For added energy efficiency, many Kenmore Coldspot refrigerators come with Energy Star ratings, so you can rest assured that you’re doing your part for the environment.
When were Sears Coldspot freezers made?
Sears Coldspot freezers were first offered in the 1920s. The Coldspot was the first refrigerator that featured an insulated body and compressor unit, allowing a far greater amount of food storage than any other refrigerator of the time.
Its popularity peaked in the 1950s and 1960s and production continued until the brand was discontinued in 1986. The brand was ultimately replaced by the Kenmore brand, which is still sold today.
How do you turn on ice maker a Kenmore Coldspot?
To turn on the ice maker in a Kenmore Coldspot, you will need to follow these steps:
1. Locate the switch on the inside right wall of the freezer.
2. Slide the switch to the ON position.
3. Wait twenty-four hours for the first batch of ice to form.
Once you have followed these steps, your ice maker should be able to begin automatically producing ice. If your ice maker does not produce ice after waiting twenty-four hours, try making sure the water supply valve is open and the water supply is connected correctly.
Additionally, check the water filter to make sure it is not clogged and that it is installed correctly. Finally, make sure the adjustment arm on the ice maker is raised to the ON position and not the OFF position.
If you have followed these steps and are still having issues, contact a Kenmore representative for further help.
Why is my ice maker not making ice but water works?
There could be a few possible reasons why your ice maker is not making ice but water works. First, make sure the ice maker switch or control arm is turned on. If it is not, turn it on and wait 24 hours for the first batch of ice to be made.
You may also want to check the water supply line for any kinks or issues that could be restricting the water flow to the ice maker.
The next thing to check is the water filter. If the filter is old, clogged, or blocked, it can restrict the amount of water that reaches the ice maker. Replace the filter and then wait 24 hours for the ice maker to cycle through again.
If the ice maker still isn’t making ice after you have tried the above steps, the next thing to do is to check the thermostat in the ice maker. If your thermostat is not set at the correct temperature, the ice maker will not cycle correctly and will not make ice.
Adjust the thermostat according to the manufacturer’s instructions and wait 24 hours for the first batch of ice to be made.
Finally, if none of the above steps solve the issue, you may need to call a service technician to check the ice maker components and determine what the issue is.
Why is my Kenmore fridge not cooling but freezer works?
It’s possible there can be a few reasons why your Kenmore fridge is not cooling but the freezer is still working.
– First, check the condenser coils to see if they are blocked by pet hair, lint, or dirt. This can cause the refrigerator to not cool properly since the condenser coils are responsible for releasing the heat from the refrigerant.
– Secondly, make sure the evaporator fan motor is running. If it isn’t running, then the cold air won’t be circulated into the refrigerator compartment.
– Lastly, check the thermostat to ensure it is set to the correct temperature. It may have accidentally been turned up or down, which would prevent the refrigerator from cooling correctly.
If none of these steps help, then it may be time to call a technician to see if there’s a deeper issue. The technician may need to check the compressor to determine if it needs to be replaced.
Why would my ice maker suddenly stopped making ice?
There could be several reasons why your ice maker has stopped making ice. The most common causes are problems with the water supply, the freezer temperature, the control modules, or the ice maker itself.
The first step to take is to check the water supply. Sometimes the water supply can become clogged with sediment, or you may have a bad water valve. To check this, locate the water valve and make sure it’s open.
If it’s open and the ice maker still isn’t making ice, you may need to clean the water line or replace the water valve.
A freezer temperature problem can also cause your ice maker to stop making ice. Make sure that your freezer is set to the right temperature (generally 0–5°F). Additionally, if the freezer isn’t properly sealed, air can enter and upset the temperature balance.
Check the door seal and make sure it’s intact to ensure a proper temperature.
Next, check the control modules. If the ice maker isn’t getting the proper signals from the control modules, it won’t function properly. To investigate this, refer to the appliance manual for instructions on how to reset the control modules.
Once you have ruled out the other possibilities, you may need to replace the ice maker. If this is the case, unplug the refrigerator and contact a professional for assistance.
If your ice maker is still not producing ice, you may have a larger issue with your refrigerator that needs to be addressed. In this case, it is best to call a professional for help.
Where is the on/off switch on Kenmore ice maker?
The on/off switch on a Kenmore ice maker is usually located at the back of the appliance. If you have a side-by-side refrigerator, the switch may be located at the top of the ice maker, typically close to the front.
If the Kenmore ice maker is in a freezer compartment, the switch may be located near the floor. To ensure you are pressing the correct switch, check the operating manual that came with the appliance.
To turn the ice maker on, typically you would press the switch up. To turn the ice maker off, press the switch down.
How do I turn my ice maker back on?
To turn your ice maker back on, start by ensuring it is powered on. Depending on the model, there may be an on/off switch on the back or side of the unit. If friction is the issue, you may need to reset the arm switch by moving it up and down or slightly pushing it.
You may need to adjust the ice maker to level it properly or it will not function as it should. Additionally, check to make sure the water line that supplies water to the ice maker is connected and free of any kinks, cracks, or blockages.
If your ice maker has an inline filter, make sure it has been replaced within the last six months or as recommended by the manufacturer. Lastly, you may need to adjust the water temperature if the water coming into the ice maker is not cold enough.
refer to your owner’s manual for specific model information.
How do I activate the ice maker?
To activate your ice maker, start by making sure the ice container is firmly in place. Then, locate the shut-off toggle switch, which is typically located near the ice dispenser or filter. Make sure it’s in the “on” position.
Once the shut-off toggle switch is in the “on” position, locate the ice level control. Depending on your model, this could be a lever arm, knob, slide, or button. Make sure the control is set to the “on” position.
Next, locate the water line, which is typically connected to the back of the refrigerator. Make sure the two shut-off valves are in the “on” position. If the valves appear to be stuck, try to gently twist or rotate them to help loosen them.
Now that the water line is open, open the refrigerator door and locate the water filter (if applicable). Depending on your model, you may be required to reset your filter by pressing and holding the reset button for up to three seconds.
Now, it’s time to power on the ice maker. Locate the electrical cord or outlet located at the back of the unit, then make sure the power switch is in the “on” position.
You may need to wait up to 24 hours for the ice maker to start producing ice. If after 24 hours it still hasn’t produced any ice, check the shut-off toggle, ice level control, water line, filter and power switch again, to make sure everything is in the correct position.
If everything is in the correct position and still no ice is produced, contact a repair technician for assistance.
How do I know if my ice maker switch is on or off?
To determine if your ice maker switch is on or off, you will need to first identify where the switch is located in your ice maker. Typically, the switch is located behind the unit near the refrigerator.
Once you have located it, using a small flashlight to inspect the switch, you should be able to determine if it is in the “on” or “off” position. If the switch appears to be in the “on” position, then it is switched on.
If the switch appears to be in the “off” position, then it is switched off. If you cannot determine the switch’s position, you should feel the switch — if it is warm to the touch, then it is switched on; and if it is cold, it is off.
Will unplugging my fridge reset the ice maker?
No, unplugging a refrigerator will not reset the ice maker. Depending on the model of refrigerator, resetting the ice maker may require manipulating specific buttons or controls on the appliance. This typically involves pressing and holding a particular button or combination of buttons until the processor inside the refrigerator has reset itself.
Additionally, many modern refrigerators have sophisticated modular ice makers that may need to be reset separately and differently than the overall appliance. Instructions for resetting the ice maker for a specific model of refrigerator can typically be found in the owner’s manual.
However, if you don’t have one, it can often be accessed through the manufacturer’s website or by searching for the model number of your refrigerator followed by “ice maker reset” in a search engine.
While resetting the ice maker does not necessarily require any knowledge or expertise in appliance repair, it is important to carefully follow instructions and take all necessary safety precautions.
How do you fix a Kenmore refrigerator that is not cold?
Fixing a Kenmore refrigerator that is not cold can be done in a few steps. First, try to figure out why the refrigerator isn’t cold. Check to make sure the power cord is plugged in and that the temperature control is set correctly.
If either of these are issues, then resetting the power and temperature should solve the issue.
If that does not work, check the condenser coils. If the coils are dirty, you’ll need to clean them to ensure that the cool air is able to circulate properly. This can be done with a vacuum and a condenser coil brush.
Once the condenser coils have been cleaned, inspect the evaporator fan motor and blades. If it is not spinning properly, it may need to be replaced.
Finally, check the thermostat and see if it needs to be adjusted. If the thermostat is broken or needs to be replaced, then that could be the cause of the refrigerator not being cold.
Once these steps have been taken, the refrigerator should be cold again. If it is still not cold, it may be time to call a professional to check the system and see if there is a more serious issue.
How do you reset the compressor on a Kenmore refrigerator?
To reset the compressor on a Kenmore refrigerator, the following steps must be followed:
1. Unplug the refrigerator from the wall outlet and leave it unplugged for at least 5 minutes to clear any stored energy.
2. After 5 minutes, plug the refrigerator back into the outlet and allow it to sit for another 5 minutes.
3. Locate the compressor reset switch on the back, bottom or side of Kenmore refrigerator.
4. Push the reset button firmly and held it down. The compressor should start. Release the reset button.
5. If the compressor doesn’t start, try resetting it again. If resetting doesn’t work, consult the user manual or customer service hotline of the Kenmore refrigerator.
6. If the compressor starts, wait 30 minutes before plugging any other appliance into the same outlet, then plug in the refrigerator.